ID Mandrel Collet (From 12mm to 120mm)

Application

Technical Features:

⚫Double taper mandrel, due to anti-rotation design, the sleeve

collet and arbor will no relative rotation when the workpiece is

clamping;

⚫One grip arbor can be matched with different sleeve collet, realize

to change the collet quickly;

⚫Collet adopt multi-slopes design, assuring the clamping accuracy

and repeatability within good performance.

⚫The arbor body can pre-set air inspection hole, so that customer

can rebuild and optimize according to the working condition.

drawing

share to:

Share on facebook
Share on twitter
Share on linkedin
Share on pinterest
parameters
Item No. Clamping Range No.of Collets Available A B C D E F G H
AC2110 12.70-16.64 10 63.2 22.4 9.9 16.8 12.7 11.94-11.92 31.8 85.74-85.73
AC2210 15.06-19.81 12 68.3 26.9 10.4 16.8 12.7 14.72-14.70 31.8 85.74-85.73
AC2310 18.24-25.37 18 75.2 31.7 12.4 16.8 12.7 17.90-17.88 31.8 85.74-85.73
AC2410 22.23-31.72 12 90.9 36.6 14.2 22.9 14.2 21.47-21.44 44.5 104.79-104.78
AC2510 28.58-41.25 16 98.8 41.1 17.5 22.9 14.2 27.42-27.40 44.5 104.79-104.78
AC2610 37.29-53.14 20 105.1 46 20.8 18.3 17.3 35.76-35.73 63.5 123.84-123.83
AC2710 49.02-72.21 29 113.2 50.8 25.4 16.8 17.3 46.87-46.84 63.5 123.84-123.83
AC2810 65.07-91.26 33 122.7 57.2 28.4 16.8 17.3 61.95-61.94 76.2 139.71-139.70
AC2910 84.12-113.46 37 126.2 63.5 28.2 14.2 17.3 80.99-80.98 91.9 139.71-139.70

Unless otherwise specified, all dimensions are mm.