Technical Features:
⚫Clamping the outer diameter of the workpiece, especially suitable
for thin-walled parts finishing and semi-finishing;
⚫Good interchangeability;
⚫Unique material and processing technology make the collet have
high precision and long service life;
⚫Not only round design, the collet can also be NC-copying machined
to clamp thin-wall, special-shape and eccentric workpieces etc;
⚫According to working conditions, the locating block can be
designed in various ways, and airtight seating detection is available;
⚫Feasible to feeding-and-unloading orientation/directional design,
to meet the needs of automatic production;
⚫Excellent dynamic balance characteristics;
⚫According to the requirements of working condition, feasible to
pneumatic and hydraulic cylinder built-in I driving by draw tube, and
manual clamping is available;
⚫Extra large internal space, so that the chuck body can be built-in
design according to needs, suitable for shell processing
| Size | A | B | C | D | E | F | G | H |
| 6〞 | 20.00-35.5 | 95.00 | 150.00 | 125.00 | 15.00 | 31.25 | 54.00 | 86.00 |
| 7〞 | 30.00-45.50 | 120.00 | 175.00 | 150.00 | 15.00 | 31.25 | 61.00 | 93.00 |
| 7〞 | 40.00-61.00 | 120.00 | 175.00 | 150.00 | 15.00 | 32.00 | 61.00 | 96.00 |
| 8〞 | 55.00-76.00 | 145.00 | 200.00 | 175.00 | 15.00 | 32.00 | 54.00 | 98.00 |
| 9〞 | 70.00-90.00 | 170.00 | 225.00 | 200.00 | 15.00 | 32.00 | 54.00 | 102.00 |
| 9〞 | 85.00-105.00 | 170.00 | 225.00 | 200.00 | 15.00 | 32.00 | 54.00 | 106.00 |
| 10〞 | 100.00-120.00 | 195.00 | 250.00 | 225.00 | 15.00 | 32.00 | 54.00 | 120.00 |
| 11〞 | 115.00-140.00 | 220.00 | 275.00 | 250.00 | 15.00 | 32.00 | 54.00 | 125.00 |
| 11〞 | 135.00-160.00 | 220.00 | 275.00 | 250.00 | 15.00 | 32.00 | 54.00 | 132.00 |
| 12〞 | 155.00-180.00 | 245.00 | 300.00 | 275.00 | 15.00 | 32.00 | 54.00 | 137.00 |
Unless otherwise specified, all dimensions are mm.
