Technical Features:
⚫The chuck is similar to the standard chuck size, the jaws are
interchangeably, when the tooth shape is coincident;
⚫The through hole is bigger, please refer to the following table;
⚫Design of through hole is suitable for long shaft workpiece
machining.
⚫Jaws can be customized to clamping special shaped parts.
⚫Feasible to design airtight seat detection
| Size | A | B | C | D | E | F | G | H | I |
| 4 | 118 | 110 | 59 | 4 | 16 | 3-M10 | 82.6 | 33 | 24 |
| 5 | 138 | 110 | 60 | 4 | 15 | 3-M10 | 82.6 | 39 | 31 |
| 6 | 170 | 140 | 81 | 5 | 16 | 3-M10 | 104.8 | 53 | 37 |
| 8 | 210 | 170 | 91 | 5 | 17 | 3-M12 | 133.4 | 66 | 38 |
| 10B | 260 | 220 | 100 | 5 | 22 | 6-M16 | 171.5 | 86 | 43 |
| 12B | 315 | 300 | 110 | 6 | 30 | 6-M20 | 235 | 106 | 51 |
| 15B | 405 | 380 | 133 | 6 | 35 | 6-M24 | 330.2 | 140 | 63 |
| 18B | 456 | 380 | 145 | 6 | 38 | 6-M24 | 330.2 | 165 | 63 |
| 21B | 530 | 380 | 140 | 6 | 35 | 6-M24 | 330.2 | 180 | 73 |
| 24B | 610 | 520 | 147 | 6 | 35 | 6-M24 | 463.6 | 205 | 73 |
In addition to the other instructions, all dimensions are mm.
